Home / IP Phones / Deskphone Firmware / Update EHS30 Firmware

Update EHS30 Firmware

Updating the EHS30's Firmware

  1. Log into the web GUI of the phone.
    02-PhoneHome_Marked

  2. Navigate to Settings
    03a-PhoneSettings

  3. Navigate to Preferences
    03b-PhoneSettingsPref

  4. Find the option called Zero Touch Type.
    04a-PhoneZeroTouch

  5. Set the Zero Touch Type option to EHS
    04b-PhoneZeroTouch-Marked

  6. And press the Save Set button at the bottom of the page.
    05-SaveSet

  7. Navigate to Function Keys
    06-PhoneFunction-Marked

  8. Navigate to Line Key on the Left menu.
    06-PhoneFunctionLineKey-Marked

  9. Program a spare button to be Zero Touch, set the label to be something like "EHS," and press the Save Set button at the bottom of the page.
    07-PhoneEHSButton-marked

  10. You can now press the new EHS button you programmed, and it will start the upgrade process for the EHS adapter.
    08-PhoneGUI-Marked

  11. You have 5 seconds to press the OK button to start the upgrade process.
    09-PhoneGUIUpdate-Marked

  12. Press the Start button.
    10-PhoneGUIStart-marked


  13. Your current version of EHS software will be shown.
    10b-PhoneGUIVersion-Marked

  14. You will need to disconnect the EHS adapter from the Ext/EHS port and plug it back in. Then, the process of updating will start automatically.
    11-PhoneGUIDisconnect

  15. The screen will tell you when the update is done. After the update is complete, you can press Cancel.
    12-PhoneGUIComplete



    		 RSS of this page