Clearly Anywhere: Ports and Registration for Private ClusterPBX

• The Clearly Anywhere mobile app communicates with your ClusterPBX for provisioning information by the built-in API. 

• By default when your Clearly Anywhere App goes to pull provisioning data the first request will come from the end user’s Mobile Phone.

• If you do not have the system accessible to the public, you can whitelist our API server with the following IP Addresses

• 66.185.18.42

• 66.185.18.43 

• 66.185.18.44 

• After the initial request, all subsequent requests will come from the Clearly IP Mobile API

• ClearlyIP has the ability to set a toggle on a Token by Token basis to force all Provisioning data to proxy through us so that you can open your API only to our IPs noted above.  

• To use this option, please contact support to have us enable this for you.

• Once the user is logged in and receives the provisioning data, it will register to your PBX using the realm address.  

• The phone will register to ClusterPBX. You just need to ensure you have the SIP Signaling Port and RTP Ports open for the phone to communicate with the server.  The default RTP ports can be found in your Deployment Information packet

• Since inbound calls by default are sent from Push Servers all over the world, the Push Servers have to register to your PBX for inbound calls to work.  Below is a list of all the Push Servers that calls can come from that you need to make sure are able to connect to your PBX on the SIP port.

• 107.170.65.67

• 107.170.123.70

• 107.170.151.176

• 159.65.186.176

• 159.65.251.173

• 159.65.252.186

• 159.65.253.49

• 162.243.35.55

• 162.243.66.221

• 162.243.226.67

• 162.243.226.164

• 165.227.184.188

• 167.99.48.91

• 167.99.119.203

• 167.99.119.244

• 192.241.179.113